Introduction of Gear Motor

What is a Gear Motor?
In front of the output shaft of a vertical ordinary motor (single-phase or three-phase asynchronous motor), a gear reducer is mounted to form a gear motor.
What kind of gear reducer?
1. Vertical type (with direct type and single-phase three-phase type)
2. Horizontal (Direct and Biaxial)
3 planetary gear reducer
4. Cylindrical gear reducer
Cylindrical involute gear reducer models are suitable for building materials, lifting, transportation, metallurgy, chemical and light industry. The speed of the high speed shaft does not exceed 1500r/min, the peripheral speed of the gear is not more than 12m/s, and the efficiency is not less than 0.94. The work environment of the cylindrical involute gear reducer is -40°C to +40°C, and it can be operated in positive and negative directions.
The efficiency of the gear reducer is 98%, but the gear reducer cannot be self-locking.
5. Bevel gear reducer
Features: Space-saving, reliable and durable, withstands high overload capacity, power up to 200KW, low energy consumption, superior performance, deceleration efficiency up to 95c/o above, low vibration, low noise, rigid cast iron box, gear surface after high frequency heat treatment, Precision machining constitutes helical gears and bevel gears.
6. Helical Gear Reducer
There are 2 detection methods. The premise is that the gears are installed according to the use conditions (central distance in actual use) and one of the gears cannot be rotated.
1. With a feeler gauge from the tooth gap of the face plug (the other gear can be turned), the maximum reading of the feeler that can just be inserted is the tooth gap.
2. Use a dial indicator to measure the top of the head in the vicinity of the middle section of the tooth profile of the moving gear and turn the movable gear. The reading of the watch is the backlash of the end face.
7. Planetary gear reducer
High precision, high rigidity, high load, high efficiency, low inertia, low vibration, low noise, low temperature rise