steel plant hydraulic power station

Mini Power Pack

According to customer`s requirement, GRH offers solutions to hydraulic system, designs and fabricate hydraulic pumping station for mobile and industrial system.

Mini Power Pack includes an AC or DC motor, a Gear Pump, a valve block with cartridge valve, and a oil tank. All of these components are integrated into one assembly, and forms a hydraulic circuit.  Therefore the mini power pack can deliver the flow to the hydraulic motor or cylinder in a friendly way. 

Here are some mini power packs for different applications.

Specifications:

1. Hydraulic system pressure: 200bar

2. Hydraulic oil tank volume: 6-10L      

3. Displacement of Hydraulic pump: 1.6, 2.1, 2.6cc/r

4. Motor power: 1.6KW, AC220V

5. Motor rotary speed: 2500r/min

6. Function: Single acting way

7. Color: default red/ white plastic

8. Mounting:  Horizontal

9. Material of tank: iron sheet(1-1.5mm), Engineering Plastic

10. Application: Stacker and forklift

Notice:

1.This power unit is S3 working type, can not work continuously, can work repeatedly.

2.Before installation, please be sure the cleanliness of component like tank, tube and fittings, without any impurities.

3.Viscosity of oil should be 15-68CST, should be clean and without impurities. Suggest to use N46 hydraulic oil. If need to work all-weather, must use aviation hydraulic fluid.

4.This power unit is vertical installation.

5.After first work, oil tank should be checked immediately to see if there`s enough oil.

6.After the first 100 working hour, hydraulic oil should be replaced. After that, the oil should be replaced every 3000 working hours.